Sorry, your login failed because you disagree with our privacy policy and we are unable to collect your data.
OKBulk Buy Discount
Order more and enjoy the savings
Quantity |
Price US$ |
Bulk Buy Discount
Order more and enjoy the savings
Quantity | Price US$ |
Specification:
Brand: URUAV
Item Name: UZ85 CrazybeeX Flight Controller with ESC
Weight: 6.2g
Suitable for URUAV UZ85 FPV Racing Drone, Click Here.
Flight Controller | (Frsky SPI RX version) CRAZYBEEX FR V1.0 FC Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEEX FS V1.0 FC Firmware target: CrazybeeF4FS
(No receiver version) CRAZYBEEX PNP V1.0 Firmware target:CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Built-in 5V 1A BEC |
Onboard 4 In 1 ESC | MCU upgraded to EFM8BB21 Power Supply: 1S LiPo/LiPo HV Current: 5A Continuous, Peak 6A (3 seconds) |
Onboard Frsky SPI D8 Receiver Version | Compatible SPI BUS Receiver Frsky D8 Compatible Non EU transmitter D8 model Channels: 8CH |
Onboard Flysky SPI Receiver Version | Compatible SPI BUS Receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8CH (AFHDS) or 14CH (AFHDS-2A) Failsafe Support |
PNP Version | Support sbus/ibus/spectrum/tbs crsf receiver |
Onboard 5.8g VTX | Output power: 25mw |
Onboard Voltage and Current detector | Voltage Meter scale “110” |
Description:
CrazybeeX series flight controller is the first 5in1 AIO flight controller which could handle 2s.
It’s a better upgrade flight controller for your whoops. We could use this flight controller to building a 1s-2s compatible lightest 65mm/75mm/85mm brushless whoop.
Important: Not compatible with big propeller like 65mm/75mm when use 2s battery . Recommend max size of propeller is 55mm .
Features:
CrazybeeX FR V1.0 Bind procedure:
1. Make the on board receiver get into bind mode: For 3.5.7 version firmware Plug USB and then press the bind button for 1 second , the Red LED on the top of the flight controller will getting to be solid , this indicate the receiver is in bind mode; For 4.0.x version firmware Plug USB and then connect betaflight configurator and then move to CLI tab , type “bind_rx_spi” ,the Red LED on the top of the flight controller will getting to be solid , the onboard receiver is in bind mode; For 4.1.x or 4.2.x the bind code is “bind_rx”
2. Make your Frsky transmitter get into bind mode . If bind is successful the red led will starting to blink. The red LED wouldn’t blinking when binding with some new ACCESS firmware frsky radio , but the bind is actual successful , need to go to CLI command and type “save” to finish the binding .
CrazybeeX FS V1.0 Bind procedure:
1. Make the on board receiver get into bind mode: For 3.5.7 version firmware Press and hold the bind button for 1 second ,then plug USB, the Red LED at the bottom of the flight controller will blinking fast , this indicate the receiver is in bind mode; For 4.0.x version firmware Plug USB and then connect betaflight configurator and then move to CLI tab , type “bind_rx_spi” ,the Red LED at the bottom of the flight controller will blinking fast , the onboard receiver is in bind mode; For 4.1.x or 4.2.x the bind code is “bind_rx”
2. Make your Flysky transmitter get into bind mode . If bind is successful the red led will getting to be solid.
Receiver Option:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
No internal receiver version
Package Included:
1 X URUAV UZ85 CrazybeeX Frsky/Flysky/PNP Flight Controller Built-in ESC (Optional)